The Ultimate Guide In Cleaning Composite Decking

Deck Maintenance & Care

Spray with Soapy Water and ScrubSpray the deck thoroughly with soapy water, using long sweeping motions and following the length of the boards. Gently scrub the deck with a soft-bristled brush to remove any built-up dirt on the deck. All food spills should be removed as soon as possible. The surface must be cleaned within seven days to maintain the stain warranty. To remove, spray off with a hose and use warm, soapy water and a soft bristle brush to remove spills from embossing pattern. The affected area should be sprayed off with a hose to remove surface debris. Use warm, soapy water and a soft bristle brush to remove dirt and debris from the embossing pattern.

Decking & Railing Duos

Regularly cleaning your deck and dealing with spills as soon as they occur will help to prevent mould on your deck - as will reducing its exposure to constant damp. Composite decking is far more malleable than wood. In manufacturing this is a great thing, because the materials can be easily shaped. Unfortunately, this pliability also makes this type of decking more susceptible to unwanted bending or buckling.

Never sand or use a wire brush in an attempt to remove stains from Trex. This will cause permanent damage and can make your warranty invalid. A thorough rinse will also remove any food sources for mold like dirt and grime.

This prevents more mold from forming in the future. If dust or debris has accumulated in the deck's grid pattern, use a smaller brush and clean it all out. After picking up all the food, you can follow the same cleaning steps to prevent oil and grease from staining your deck. It’s important to use ammonia-free dish soap so the soap doesn’t stain your deck or react with any other chemicals you may use for cleaning.

Produced by Seattle Times Marketing - Seattle Times

How to get the deck of your helpful resources dreams, whether you use a site link pro or DIY

Cleaning Black Mold From Your Deck

Plastic shovels or plastic/nylon bristled deck brooms should be used to easily remove snow from the deck and will limit the risk of scratches to the deck surface. Get tips for cleaning composite decks to ensure that you'll be able to clean yours effectively and safely. Try it on both your deck and furniture to get everything clean at once. Once bubbling stops, scrub the area with a scrub brush. Use your garden hose to rinse the solution from the surface and move onto the next stain.

Care And Cleaning Of Armadillo Composite Decking

How To Remove Snow & Ice From Composite Decking

For best results, dry or remove standing water with a towel or sponge mop. A garden hose will work for spot cleaning, but regular power-washing will be necessary to cut through accumulated mold, mildew, and staining. Don’t Forget the GapsDirt and debris can build up over time in the gaps between the boards. Keep these clear to allow for air to pass through them, allowing the underside of the deck to remain dry.

How To Clean Mold And Mildew From Composite Decking

Sprinkle baking soda on the area, making sure to cover the surface entirely and allow the baking soda to sit for at least 20 minutes. Use a scrub brush to wash away any mold or mildew and rinse thoroughly. Use your hose or power wash to remove as much of the surface mold as possible. First, spritz the deck with water to soften the dried cellulose fibers. This 'pre-rinse' will also allow for the cleaning solution to be more easily dispersed throughout the deck.

Can I Use Bleach To Clean My Composite Decking?

A power washer can be used for rinsing only, with a water pressure not exceeding 1,500 psi. For more information, see the our Care & Cleaning Guide. Using the Wrong CleanerComposite decking can be quite porous, so it’s important to use the correct cleaner on your deck. Avoiding using any deck cleaner that has bleach in it as it can be extremely corrosive. Instead, use an oxygenated cleaner that can reach deep into the material and clean the inside of the deck as well as the outside. Rinse with Clean WaterOnce the deck has been scrubbed, rinse thoroughly with clean water, ensuring all the soapy water has been rinsed clear from the deck.

• Use a deck brightener than contains oxalic acid on tannin stains.
• Over time, you will likely start to notice some on your deck.
• Water spots, also known as tannin stains, are normal occurrences on wood.
• Remove stubborn dirt with mild soap and a soft bristled brush.
• Make sure the surface is completely dry and then apply a deck brightener product that contains oxalic acid on the surface of your deck.
• Hose your deck off thoroughly with a water hose fitted with a good variable fan spray nozzle to loosen and remove surface debris.

Solid decking helps reduce the risk of internal moisture build up and is generally stronger. If you are looking to purchase decking, read more about different types of composite decking including hollow and solid variations, to help make your choice. One of the problems in the sweeping phase is that your decking is covered in small gaps, into which little bits of debris is sure to fall. Allow this stuff to accumulate, and it’ll form blockages that will prevent rainwater from properly draining.

Simply spray the treatment onto affected areas and let it dry. There’s no need to pressure wash or scrub beforehand, so it’s the perfect way to revitalise and maintain your deck with minimal effort. Whether your deck is looking a bit worse for wear or you simply want to spruce up your patio for summer, we’ve got you covered! Our handy guide will show you how to clean garden decking effectively in a few easy steps. Some products, such as sunblock and insect repellent, contain chemicals that may alter the surface of TimberTech Deck, Rail, or Porch and Rim Joist Covers.

If you’re organised, you can get it all done in just a couple of hours on a Sunday afternoon. Get it done during the summer, when your decking is at its driest and any water you add will evaporate quickly. When the threat of inclement weather has passed, use a broom to sweep up any existing granular pieces and discard the ice melt. This will prevent people and pets from unintentionally tracking in ice melt that could damage indoor flooring. If there is any remaining buildup of ice melt, it can be removed with water and a light scrubbing using a non-metal deck brush. When warmer temperatures return it’s advised to rinse your deck with a garden hose to get rid of any stubborn, leftover debris.